This is based on the High Pressure Ram Type Binderless Extrusion Technology. There are reliable heavy duty ram type press designed for continuous operation, equipped with a sturdy crank gear, cross head and two flywheels. One of the fly wheels acts as a pulley and is driven by the main motor through flat belt. Forced lubrication is provided by oil circulating system with dual filtration and forced cooling. Material is continuously fed through a hopper by means of a vertical feeder with its own gear box and motor. Regulated feed to the press is provided by independently driven feeding system.

Dry ground or granulated material is fed to the top of the vertical feeder by screw conveyor. The vertical screw pre-compresses and forces the material downwards into pre-compression chamber. Here the material is forced by the ram through a die system into briquettes to the cooling line. The total operation is continuous and controlled from the main electrical panel.

For the binderless production of high density solid fuel briquettes i.e BIOCOAL from all types of granulated degradable biomass, residues and wastes such as rice husk, ground nut shells, wood waste, cotton shell/stalks, mustard husk/stalk, sugar cane trash and bagasse etc.

Technical specification

Model BP6175 BP652
Production Capacity (On Saw Dust Basis, 160 kg/ M3) 750 kg/hr. 1000 kg/hr.
Swept Volume (M3/hr.) 7.5 10
Operating Parameters Input bulk density 140 to 200 KG/M3 140 to 200 KG/M3
Moisture Contents <15% <15%
Briquetting Pressure 1200 kg/CM2 for binderless briquetting
Volume Displaces (M3/hr.) 4.2 4.2
Size of Briquette
Dia
Length
60-63 mm
15-200 mm		 65-67 mm
15-200 mm
Stroke per minute 200 200
Stroke Length 175 mm 200 mm
Power Load (H.P)
Main Motor
Oil Pump
Vertical Screw
Inclined Screw
40
0.75
2
1.50
50
1
2
1.50
Dimension
Length
Width
Height
2100 mm
900 mm
1800 mm
2100 mm
900 mm
1800 mm
Nett Weight 3350 kg (Approx)m 3550 kg (Approx}
*Technical modifications reserved.

Table of Briquetting models:
Press Model BQ4125 BQ6175 BQ65200 BQ75200
Bqt diameter,mm 40 60 65 75
Stroke length,mm 125 175 200 200
RPM 275 230 200 200
Rated Production Kg/Hr 250 750 900 1200
Power HP 20 40 50 60
*Rated production is based on saw dust of 180 Kg/M3 bulk density as raw material.
<
Copyright © New Life Engineering. All rights reserved. All trademarks identified by the © are registered trademarks, respectively, of New Life Engineering. All other trademarks are the property of their respective owners.
Designed & Developed by NextGen eXperts